If it does not, try changing the remote’s batteries and test again. Next, check if the LED indicator lights up when buttons are pressed. Run your fingers over the buttons to dislodge any that may have become stuck. If a button on the remote becomes stuck in, it will prevent other functions from working. ![]() What do I do?įirst, check to make sure no buttons are stuck. My remote does not respond to button presses. The LED Indicator will blink green twice on the remote control.Press and hold the button for three seconds until the LED Indicator turns green on the remote control.How do I unpair the remote from the DTA Mini Box? If the indicator light is red, the remote is still in the original infrared mode.) ( Please note: if you don’t see a pairing code screen, repeat steps 1 and 2. Proceed by entering the pairing code displayed in blue on the pairing code pop-up screen.Please allow a few seconds for the menu to display. Press and hold the button until the LED indicator turns green.Select Settings, then Remote Control, then Remote Control Pairing.Ensure that you have a clear line-of-sight from the remote to the DTA Mini Box during the pairing process.Yes! You can pair the DTA remote to the box in RF Mode. Press and hold until the LED indicator turns green on the remote control.Ĭan I pair the DTA remote to the box so that I don’t need to point it directly at the box to change channels?.If you would decide to change the remote back to control the TV’s internal volume, please try the following: ![]() You will see the volume indicator on your screen has a different appearance from the TV’s internal volume. The remote will now control the internal volume on the DTA Mini Box.Press and hold until the LED indicator turns green on the DTA remote control.You can also program the remote to control volume through the DTA Mini Box’s internal volume. If you would like, you can use two remotes- the DTA remote to control your DTA Mini Box controls, and the remote that came with your TV to work power and volume. If the code was successful, the LED indicator will blink green twice.You will need to begin the programming method from the beginning again.) ( Please note: if you press the button again after the TV turns off, you will not be able to go back to that code. Press the button multiple times until the TV turns off.How can I program the remote without a code? If you still can’t find a code that works, try the Search Method below. If not, repeat these steps with each of the manufacturer’s codes for your brand of TV.Turn the TV back on and make sure that the and buttons also work. If the TV turns off, that means the code has been accepted. Press the button on the remote control.The LED indicator will flash green twice. Enter the first manufacturer’s code you found in step 1. ![]() On your remote, press and hold the button until the LED indicator changes from red to green.Make sure your TV is powered on and you have a solid green light on the front of your DTA Mini Box.Find the manufacturer’s code for your TV.
0 Comments
Leave a Reply. |